Downrigger rail bracket with Scotty pedestal swivel mount

Bonete PRO rail bracket features Can be installed on both sides of the boatAttach the downrigger to exactly where you want it, where you can control it switflyVery sturdy and durableEasy to attach and disassembleCan be attached to railings with a diameter of 25mm (universal size)The plastic part is made of PE plastic and the metal parts are made of 316L stainless steelDimensions (W * L * H) 150mm * 180mm * 25mm Scotty pedestal swivel mount features The downrigger can be adjusted when fishing into the side of the boat or in the direction of the boat.Swivels 360°, 16 locking points.Stainless quick-release bolts.Fits all Scotty downriggers (not Laketroller).Dimensions: 15cm x 15cm x 10cm.The dimensions of the mounting base are 11.43cm x 8.89cm. Delivery content 1pc Scotty 5-1026 pedestal swivel mount 1pc. Bonete PRO downrigger rail mounting base 3pcs 25mm aluminium stauffs 3pcs stauff washer all necessary fastening accessories, 6 pcs M6-55 6-hole screw, 4 pcs M6-25 6-hole screw, 10 pcs M6 nyloc nut, and 6 pcs M6 / 15 spring plate. Installation Pre-tighten the mounting base to the handrail with two aluminum stauffLoosely attach the 25mm aluminum stuffer of the support bar to the mounting basePlace the mounting plate horizontally, and measure the appropriate length of the support bar. Length is often measured to the top of the boat's trim.Shorten the support bar with a hacksaw, for example, and install a rubber plug on the cut end. Note! The rubber plug increases the length by about 2mm.Attach and tighten the support bar to the mounting plate. The support bar should be mounted on the backside of the boat (right bracket shown).Attach the swivel mount mounting plate to the handrail bracket with 4 bolts.Attach the turntable to the rigging washer.Finally, attach the downrigger to the turntable.